PORTED Yamaha YFZ450 04-09 cylinder head valves HOT CAMS camshaft REBUILT K-39
This is a factory OEM stock engine motor cylinder head for a Yamaha YFZ450. THIS HAS BEEN PORTED AND POLISHED. CAMS ARE HOT CAMS , #22 and #23. This was totally gone through, cleaned in a part tank, all valves were replaced with brand new ones. Everything inspected and replaced as necessary. Valves were all cut and matched, and then shimmed to proper specs. Valve seats, cam journals , and cams have all been checked and adjusted to proper specs; cam shim clearance is set properly. This is 100% bolt on ready. Includes everything seen in the photos including: factory head assembly, camshaft, cam, camshafts, valves, seats, cam journals are…
Read More
Cylinder head VW 1600cc air cooled Twin port up to 1979 complete with valves
This is a great Quality Cylinder head. It comes complete with stainless steel valves, and is designed for use with unleaded fuel. It fits VW Beetle & Type 2 fitted with 1600cc twin port engines all years up to 1979 & Mexican beetles. The item "Cylinder head VW 1600cc air cooled Twin port up to 1979 complete with valves" is in sale since Wednesday, September 2, 2015. This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Cylinder Heads & Head Covers". The seller is "megabugvw" and is located in Harrietsham. This item can be shipped to United Kingdom. Brand: MB Manufacturer Part Number: 043101355 Classic Car…
Read More
06-13 YFZ450 YFZ 450 Ported Polished Assembled Cylinder Head Port Polish Valves
AT BP RACING ATV WE DO NO JUST SELL PARTS. WE TEST, TUNE, REPAIR, AND REBUILD EVERY ATV, UTV, SIDE x SIDE, AND DIRT BIKE PRODUCED. FITS ALL'06-13 YAMAHA YFZ450 MODELS AND YEARS CARB MODEL ONLY! Listing is for a used YFZ450 OEM cylinder head (FITS ALL YEARS) that has been fully ported and polished, then assembled with new stainless steel valves and springs, retainers, collars, keepers, and valve stem seals. It will make a great addition to your stock or built motor. Please check your order thoroughly when receiving it. We recommend that this be installed by a qualified mechanic with experience doing this type of work. The item…
Read More
VW CYLINDER HEAD 1600cc AIR COOLED TWIN PORT up to 1979 COMPLETE with VALVES
Cylinder Head, for 1600cc Engines only up to 1979 Models , Dual Port. Complete with springs, Valves, Keepers and Stem Seals. OEM Part Number : 043-101-355/E. This is a top quality Complete Twinport Head made by Metan, assembled with standard 35.5mm intake valves, 32mm exhaust valves and standard springs, the valve seats are cut to correct angle. Made from high quality aluminium alloy this cylinder head to help eliminate the stress cracks the standard head suffers from. All wall thicknesses are to the original specifications. Comes completely built and ready to fit. Designed to be used to rebuild a 1600cc Twin Port engine, this has the correct valve sizes and…
Read More
Raptor 700 Ported Polished Port Polish Cylinder Head Assembled +2 Kibble Valves
FITS ALL YAMAHA RAPTOR 06-14 MODELS!!! DOES NOT FIT'15+. This Kibblewhite kit includes kit includes. Full race ported and polished, sand blasted, and assembled cylinder head. Race valve spring kit. +2mm KPMI Black Diamond stainless steel intake and exhaust valves. Only the parts listed are included. Does not come with rocker arms, shafts, or cam. Price includes the porting, modifying, and assembling of the head by our certified technician with over 20 years of experience. We recommend that this be installed by a qualified mechanic with experience doing this type of work. The item "Raptor 700 Ported Polished Port Polish Cylinder Head Assembled +2 Kibble Valves" is in sale since…
Read More
PREDATOR 212 cylinder head (INCLUDES VALVES 32/28) Ported, Guides, BEST VALUE
PREDATOR 212 cylinder head 14cc 32/28 valves , bronze guides, ported, radius cuts. 32/28 chrome molly seats installed. Multi angle seat cuts (5 angle). Guides reamed and honed. Spring pockets cut for 37lb springs or dual 60s. Polished chamber to a mirror smooth shine. Radius bowl cuts to fully unshroud the valves. 32mm stainless steel valve (coated). 28mm stainless steel valve (coated). Dowels reamed fits non hemi / Clone / tillotson/ predator. Can ream dowel to 11mm for 3rd gen pred. This head will boost your compression ratio and will increase the flow of the engine: The two ways you make power. This head gives you both. Big seats allow…
Read More
Ford Cross-flow / Kent Cylinder Head. Large valves and ported
Ford Cross-flow / Kent cylinder head. Large valves and ports enlarged. Comes complete with valves, springs and retainers. Looks to be in full working order, although I have not used it myself to prove this. Ideal local collection as heavy, but happy to send via courier. Prefer cash on collection. The item "Ford Cross-flow / Kent Cylinder Head. Large valves and ported" is in sale since Wednesday, June 3, 2020. This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Cylinder Heads & Head Covers". The seller is "davrian78" and is located in Stratford-upon-Avon. This item can be shipped to United Kingdom.
Read More
Porsche 901 911 1964-1967 Cylinder Heads 2.0 liter SWB 39/35 valves 32/32 ports
These cylinder heads have been refurbished with new guides and Wrightwood Racing Teflon valve stem seals and have been refaced by 0.25mm (0.010 in) for a perfect seal to the cylinders. Ether run them as they are for a slightly improved compression or use the factory thicker cylinder base shims to make up for the 0.25mm they have been shaved. All studs/ hardware have been re-plated with Zinc-yellow Trivalent Chromate or replaced as needed as shown in the photos. Please check out the photos closely. These are very decent heads with minimum pitting in the combustion chambers and the ports look very good. Porsche part number for each head is…
Read More