Port Cylinder Head

triumph
Triumph_Spitfire_Mk3_4_Herald_13_60_Cylinder_Ported_Modified_Race_Head_01_entx

Triumph Spitfire Mk3/4 Herald 13/60 Cylinder Ported Modified Race Head

Used head that was taken off a race / track car, it has been ported / ground down on all the inlet & exhaust ports. Has brand new core plugs. These heads are notorious for having lots of burrs and casting marks, this head has had all of the ports ground down to allow maximum flow. The head would probably benefit from a skim but could bolt straight on to any herald 13/60 , spitfire mk3 or potentially 1300 dolomite. Is a original head thats been taken off a mk3 small journal engine. The item "TRIUMPH SPITFIRE MK3/4 HERALD 13/60 CYLINDER PORTED MODIFIED RACE HEAD" is in sale since Tuesday,…
Read More
Triumph_TR2_Unleaded_Low_Port_Cylinder_Head_01_hrht

Triumph TR2 Unleaded Low Port Cylinder Head

Triumph TR2 Unleaded Low Port Cylinder Head. This very rare Cylinder Head has been blasted, pressure tested. Hardened exhaust seats and stainless exhaust valves. New inlet valves, 8 bronze valve guides. New valve springs and alloy spring caps. Any questions please ask. The item "Triumph TR2 Unleaded Low Port Cylinder Head" is in sale since Tuesday, January 5, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Gaskets & Seals". The seller is "c50den" and is located in Wallingford. This item can't be shipped, the buyer must pick up the item. Brand: Triumph Manufacturer Part Number: Does Not Apply Classic Car Part: Yes Type: Cylinder…
Read More
Triumph_T140V_Cylinder_Head_Push_Over_Port_01_rhy

Triumph T140V Cylinder Head Push Over Port

Triumph T140V Cylinder Head Push Over Port. In really nice condition possibly a new old stock factory reject as its had one tidy fin repair to the underside. The item "Triumph T140V Cylinder Head Push Over Port" is in sale since Sunday, January 31, 2021. This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts". The seller is "triumphtwinspares" and is located in GB. This item can be shipped to United Kingdom. Brand: Triumph Manufacturer Part Number: Does Not Apply
Read More
1960_Triumph_Bonneville_Cylinder_Head_No_Cracks_MILD_Porting_Good_Seats_01_jz

1960 Triumph Bonneville Cylinder Head. No Cracks. MILD Porting. Good Seats

After 35 years of working on British bikes including a stint as an authorized Triumph dealer, it is time to start slowing down. I will be offering a wide selection of new and used parts that I have collected through those many years. Some good, some bad, some ugly!! 1960 dated 8 bolt Triumph Bonneville cylinder head. Seats are good, does not have any of the common cracks from the combustion chamber to the head bolt holes. Has had alloy intake manifolds welded in place with mild porting to allow the fitment of 1 1/8 or possibly 1 5/32 bore carburators. Auctiva offers Free Image Hosting and Editing. Auctiva gets…
Read More
Triumph_TR3_TR4_TR4A_High_Port_Engine_Cylinder_Head_Stamped_511695_T1752_01_ej

Triumph TR3 TR4 TR4A High Port Engine Cylinder Head. Stamped #511695. T1752

E B a y Store! We are in the British, Italian, and special interest car business. We specialize in antique cars and parts. TRIUMPH TR3 TR3A TR4 TR4A. ORIGINAL HIGH PORT ENGINE CYLINDER HEAD ASSEMBLY. WE WILL STAND BEHIND THIS HEAD AS HAVING NO CRACKS. We recently acquired a large collection of TR3/TR4 parts from a restoration project that was started but never finished. All parts have been sitting for some time i n dry storage. Please look at ALL photos carefully! There are no "stock" photos here at Katz Klassics ; what you see is exactly what you get! We make many sales on best offers. Don't hesitate to…
Read More
Reconditioned_and_Primed_Wide_Port_Engine_Cylinder_Head_218227_for_Triumph_TR6_01_yc

Reconditioned and Primed Wide-Port Engine Cylinder Head 218227 for Triumph TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the wide-port induction head found on the later-model Triumph TR6. This cylinder head can also be retrofitted to a TR250, TR5, and earlier TR6, provided that you also have the proper later wide-port intake manifold for this wider-port induction head configuration. The distance between these intake ports is approximately 0.95. We measured a factory stock head thickness of 3.55 with our shop caliper. The Stanpart casting number is 312388. The part number stamped on this cylinder head is 218227. This engine cylinder head was…
Read More
Triumph_Tiger_Cub_Large_Inlet_Valve_And_Large_Inlet_Port_Oval_Cylinder_Head_01_si

Triumph Tiger Cub Large Inlet Valve And Large Inlet Port Oval Cylinder Head

Triumph Tiger Cub oval type cylinder head with large inlet valve and large inlet port. All good threads and no broken fins that i can see but have a good look at all the pictures. The item "Triumph Tiger Cub Large Inlet Valve And Large Inlet Port Oval Cylinder Head" is in sale since Saturday, October 31, 2020. This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Engines & Engine Parts\Cylinder Heads & Valve Covers". The seller is "greystone-tigercub" and is located in Whitstable. This item can be shipped worldwide. Type: Cylinder Head Brand: Triumph
Read More
Reconditioned_and_Primed_Wide_Port_Engine_Cylinder_Head_218227_for_Triumph_TR6_01_ds

Reconditioned and Primed Wide-Port Engine Cylinder Head 218227 for Triumph TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the wide-port induction head found on the later-model Triumph TR6. This cylinder head can also be retrofitted to a TR250, TR5, and earlier TR6, provided that you also have the proper later wide-port intake manifold for this wider-port induction head configuration. The distance between these intake ports is approximately 0.95. We measured a factory stock head thickness of 3.55 with our shop caliper. The Stanpart casting number is 312388. The part number stamped on this cylinder head is 218227. This engine cylinder head was…
Read More
Reconditioned_Narrow_Port_Engine_Cylinder_Head_516323_for_Triumph_TR250_and_TR6_01_qzvw

Reconditioned Narrow-Port Engine Cylinder Head 516323 for Triumph TR250 and TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the narrow-port induction head found on the Triumph TR250 and early TR6. This cylinder head can also be retrofitted to a later TR6 provided that you also have the proper earlier narrow-port intake manifold for this narrow-port induction head configuration. The distance between these intake ports is approximately 0.65. The Stanpart casting number is 307837. The part number stamped on this cylinder head is 516323. We measured a head thickness of 3.45 with our shop caliper. This OEM cylinder head was recently serviced. By…
Read More
Reconditioned_and_Primed_Wide_Port_Engine_Cylinder_Head_219019_for_Triumph_TR6_01_be

Reconditioned and Primed Wide-Port Engine Cylinder Head 219019 for Triumph TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the wide-port induction head found on the later-model Triumph TR6. This cylinder head can also be retrofitted to a TR250, TR5, and earlier TR6, provided that you also have the proper later wide-port intake manifold for this wider-port induction head configuration. The distance between these intake ports is approximately 0.95. We measured a factory stock head thickness of 3.55 with our shop caliper. The Stanpart casting number is 313247. The part number stamped on this cylinder head is 219019. This engine cylinder head was…
Read More