Port Cylinder Head

cylinder
AFR_SBC_235cc_Competition_CNC_Spread_Port_Cylinder_Heads_Ti_Retainers_1136_TI_01_ow

AFR SBC 235cc Competition CNC Spread Port Cylinder Heads Ti Retainers 1136-TI

AFR Direct Master Warehouse Distributor - All AFR Products Available. AFR 235cc SBC Spread Port Cylinder Heads. Spread port heads have the center exhaust ports spread apart approximately 1/2 over stock GM heads. The reason for spread port heads is to achieve additional cooling in the center of the head where the heat concentration is greatest. As standard headers do not fit, spread port headers are required since the center ports are spread further apart than stock GM products. The increased spacing on the exhaust port also requires the use of exhaust gasket Fel-Pro #1409. Spread port heads only come with a Stahl bolt pattern. AFR's spread port head has…
Read More
Mg_rover_Lotus_k_series_cylinder_head_vvc_ported_01_bbcg

Mg rover Lotus k series cylinder head vvc ported

Mg rover Lotus k series cylinder head vvc ported. Was bought as a spare for my car but no longer required, some valves have been changed at some stage but head looks in good condition and has been cleaned. The item "Mg rover Lotus k series cylinder head vvc ported" is in sale since Friday, February 5, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Cylinder Heads & Head Covers". The seller is "cli_1986" and is located in Barry. This item can be shipped to United Kingdom. Manufacturer Part Number: Does Not Apply Brand: Rover
Read More
Original_Early_Jaguar_4_2_Cylinder_Head_MK10_Etype_Gold_Top_Straight_Port_01_tdq

Original Early Jaguar 4.2 Cylinder Head. MK10 / Etype. Gold Top. Straight Port

Original early Jaguar 4.2 cylinder head. Removed from a MK10 4.2 engine. This is suitable for all early 4.2 Jaguar engines with the flat rear block. The later heads and blocks have extra water ways on the back. Only a small amount of corrosion on some of the water ways. A Bit About Classic Quality (Parts) Ltd. We specialize in new and second hand parts for Classic Jaguars. We have in stock a large number of second hand original parts. We also source original and rare parts for clients using a large list of contacts we have. The item "Original Early Jaguar 4.2 Cylinder Head. MK10 / Etype. Gold Top.…
Read More
FRANKENSTEIN_ENGINE_DYNAMICS_F710_LS7_Cylinder_Head_Square_Port_Bare_01_sdiq

FRANKENSTEIN ENGINE DYNAMICS F710 LS7 Cylinder Head Square Port Bare

Part Number: FED116033 Key Features: Cylinder Head - F710 - Bare - 2.250 / 1.615 in Valve - 287 cc Intake - 68 cc Chamber - Black Valve Covers Included - Aluminum - LS7 - GM LS-Series - Each. ABOUT AMCO AUTO PARTS, LLC. Since 2002 AMCO Auto Parts, LLC has been striving to supply and support car enthusiasts around the world with the products and service they deserve. With the economy the way it is we understand how important pricing is. Here at AMCO Auto Parts, LLC our car parts are some of the lowest prices around. With that in mind you will not lose quality. We offer auto…
Read More
Proven_Moto_Cylinder_Head_Power_Kit_YAMAHA_YZ250F_2015_2017_ported_racing_head_01_qsab

Proven Moto Cylinder Head Power Kit YAMAHA YZ250F 2015-2017 ported racing head

Proven Moto Performance Cylinder Head Power Kit. The Proven Moto cylinder head port spec has gone through rigorous R&D. It has been flow bench developed as well as tested on the dynamometer and motocross & supercross tracks with professional AMA riders to confirm the best in performance and reliability. The final spec has been digitized and is replicated through CNC machining for the exact same spec every time. The Proven Moto Power Kit is used by professional SX/MX Race Teams & Racers. The Proven Moto Power Kit comes as a fully assembled, CNC Ported OEM cylinder head and includes the OEM valve train and performance modified OEM Intake camshaft. The…
Read More
Triumph_TR2_Unleaded_Low_Port_Cylinder_Head_01_hrht

Triumph TR2 Unleaded Low Port Cylinder Head

Triumph TR2 Unleaded Low Port Cylinder Head. This very rare Cylinder Head has been blasted, pressure tested. Hardened exhaust seats and stainless exhaust valves. New inlet valves, 8 bronze valve guides. New valve springs and alloy spring caps. Any questions please ask. The item "Triumph TR2 Unleaded Low Port Cylinder Head" is in sale since Tuesday, January 5, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Gaskets & Seals". The seller is "c50den" and is located in Wallingford. This item can't be shipped, the buyer must pick up the item. Brand: Triumph Manufacturer Part Number: Does Not Apply Classic Car Part: Yes Type: Cylinder…
Read More
VW_Air_Cooled_Junk_Shop_Pair_of_unbranded_1600cc_twin_port_Cylinder_Heads_01_vzo

VW Air Cooled Junk Shop Pair of unbranded 1600cc twin port Cylinder Heads

Restore your VW Classic vehicle with original parts! Pair of unbranded twin port 1600cc Cylinder Heads. Make unknown Heads may need stripping and cleaning. Pair, but one stamped one not. Local collection is only available on oversized packages. We do our best to accurately describe items and photograph any damage. Although all our products have come off original and running vehicles we can not guarantee the working condition of some products. New products added all the time so save us as a favourite or check back in. The item "VW Air Cooled Junk Shop Pair of unbranded 1600cc twin port Cylinder Heads" is in sale since Saturday, January 9, 2021.…
Read More
LS_Intake_Manifold_Spacer_for_Rectangle_Port_Cylinder_Head_LS3_L92_L99_LS9_LSA_01_sho

LS Intake Manifold Spacer for Rectangle Port Cylinder Head LS3 L92 L99 LS9 LSA

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. LS Rectangular Port Intake Manifold Spacer. Compatible with these engine RPO codes: LS3, L99, LSA, L94, L76, L77, L96, L98, L92, L9H, LY6, LFA, LZ1, LS9. Raises the intake manifold (or supercharger) approximately 1/2. Includes: 2 riser plates, 8 orings, and flange bolts (bolts included are for "car" intakes). Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. If you are running a. Intake you will need M6-90mm bolts, and M6 washers. ICT Billet LLC is not responsible for missing or lost…
Read More
Gx390_CYLINDER_HEAD_BIG_VALVE_PORTED_BRONZE_GUIDES_MULTI_01_rex

Gx390 CYLINDER HEAD BIG VALVE, PORTED, BRONZE GUIDES, MULTI

HONDA GX390 / PREDATOR 420 HEAD/ DUROMAX 420,440/ LIFAN 420 PORTED, BRONZE GUIDES, POLISHED. Valve train available under sellers other items. NEW PERFORMANCE CYLINDER HEAD. Fits : Predator 420 / GX390 / duromax 420,440 / lifan 420 and more of this style. Brand new and heavily modified cylinder head for racing applications. Cylinder head design allows the intake charge to get supercharged during valve overlap with proper cam selection/design and this head is the best at this. This makes modified head such a great tuning option. And the best head to run on the GX390/ 420 / 440 / 460 +. This creates the quench effect which is tight areas…
Read More
1989_95_yamaha_fzr_1000_ported_cylinder_head_with_head_cams_lifters_valves_r76_01_ugkt

1989 95 yamaha fzr 1000 ported cylinder head with head cams lifters valves r76

All items are in good shape and work unless otherwise stated.... Check the condition section for details We take pride in answering questions in a very timely manner. If the offer option is on the items page you are welcome to submit reasonable offers. If you have an issue with your item let us know, we want the opportunity to correct the issue. The item "1989 95 yamaha fzr 1000 ported cylinder head with head cams lifters valves r76" is in sale since Wednesday, May 13, 2020. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Engines & Engine Parts\Crankshafts & Connecting Rods". The seller is "quadstdc" and is…
Read More