Full race spec cylinder head, Kit ECU and loom and Hawk racing custom Throttle bodies/airbox/tank. Ported head with repositioned inlet rubbers and has ground through the aluminium so epoxy is built up to fill the holes. Custom grind Kent Race Cams with these specs. Cam lift = 10.35mm. Duration at 0.25mm = 306. Duration at 1.0mm = 260. Valve clearance = 0.2mm. Lobe centre = 104. Cam lift = 9.0mm. Duration at 0.25mm = 304. Duration at 1.0mm = 258. Valve clearance = 0.25mm. Lobe centre = 106. The valves/springs may have been upgraded but I dont know anything about this, some of the buckets are anodised a black colour so look non-standard. Kawasaki kit ECU and loom mapped to the Hawk racing throttle bodies with four supplementary injectors. The fuel tank has been recessed for the extra height if the TBs and there is a carbon Kevlar airbox to match. All this kit works together and was producing 200bhp at the wheel with these Hawk racing TBs and kit ECU. The item “Kawasaki ZX10R Ported Cylinder Head, Kit ECU/Loom And Hawk TBs Airbox 2004″ is in sale since Friday, June 26, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Engines & Engine Parts\Cylinder Heads & Valve Covers”. The seller is “birchall_hawke” and is located in Colne. This item can be shipped to United Kingdom.
- Manufacturer Part Number: Does Not Apply
- Brand: Kawasaki
- Intended Use: Performance Part
- Type: Cylinder Head