Reconditioned_6_Port_Engine_Cylinder_Head_AEC_960_Austin_Healey_3000_BT7_BJ7_BJ8_01_ch

Reconditioned 6-Port Engine Cylinder Head AEC 960 Austin Healey 3000 BT7 BJ7 BJ8

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder 6-port engine cylinder head assembly for the stock in-line 6-cylinder engine found in the various Austin Healey 3000 BT7, BJ7, and BJ8 models. This is BMC casting number AEC 960. We measured a stock head thickness of 3.68 with our shop caliper. This engine cylinder head was recently serviced. By our local reputable auto parts machine shop. This head was thoroughly degreased, hot-tanked and shot-peened to the bare casting. The head was also magnafuxed for integrity. No cracks were found or any other issues were indicated by our machine shop. The head was finished in cast iron…
Read More
Reconditioned_and_Primed_Wide_Port_Engine_Cylinder_Head_218227_for_Triumph_TR6_01_yc

Reconditioned and Primed Wide-Port Engine Cylinder Head 218227 for Triumph TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the wide-port induction head found on the later-model Triumph TR6. This cylinder head can also be retrofitted to a TR250, TR5, and earlier TR6, provided that you also have the proper later wide-port intake manifold for this wider-port induction head configuration. The distance between these intake ports is approximately 0.95. We measured a factory stock head thickness of 3.55 with our shop caliper. The Stanpart casting number is 312388. The part number stamped on this cylinder head is 218227. This engine cylinder head was…
Read More
Reconditioned_Ported_Engine_Cylinder_Head_12H1326_1963_1970_MGB_race_01_ha

Reconditioned Ported Engine Cylinder Head 12H1326 1963 1970 MGB race

This head was built for a personal project and never used. I started with the 12H1326 which is the best of the MGB heads. All new valves and unrated dual springs. The intake valve seats were enlarged to allow for the use of a factory 1973 MGB big valve 1.625 VS the original 1.562. The head has a 5 angle valve job to accommodate better flow. 2 angles are cut on the valve and 3 on the seats. The exhaust seats are hardened so you can run unleaded. The head was professionally ported and polished to increase flow. This head with work on any pre 18v car. Since these head…
Read More
Reconditioned_and_Primed_Wide_Port_Engine_Cylinder_Head_218227_for_Triumph_TR6_01_ds

Reconditioned and Primed Wide-Port Engine Cylinder Head 218227 for Triumph TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the wide-port induction head found on the later-model Triumph TR6. This cylinder head can also be retrofitted to a TR250, TR5, and earlier TR6, provided that you also have the proper later wide-port intake manifold for this wider-port induction head configuration. The distance between these intake ports is approximately 0.95. We measured a factory stock head thickness of 3.55 with our shop caliper. The Stanpart casting number is 312388. The part number stamped on this cylinder head is 218227. This engine cylinder head was…
Read More
Reconditioned_Narrow_Port_Engine_Cylinder_Head_516323_for_Triumph_TR250_and_TR6_01_qzvw

Reconditioned Narrow-Port Engine Cylinder Head 516323 for Triumph TR250 and TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the narrow-port induction head found on the Triumph TR250 and early TR6. This cylinder head can also be retrofitted to a later TR6 provided that you also have the proper earlier narrow-port intake manifold for this narrow-port induction head configuration. The distance between these intake ports is approximately 0.65. The Stanpart casting number is 307837. The part number stamped on this cylinder head is 516323. We measured a head thickness of 3.45 with our shop caliper. This OEM cylinder head was recently serviced. By…
Read More
Reconditioned_6_Port_Engine_Cylinder_Head_AEC_960_Austin_Healey_3000_BT7_BJ7_BJ8_01_wo

Reconditioned 6-Port Engine Cylinder Head AEC 960 Austin Healey 3000 BT7 BJ7 BJ8

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder 6-port engine cylinder head assembly for the stock in-line 6-cylinder engine found in the various Austin Healey 3000 BT7, BJ7, and BJ8 models. This is BMC casting number AEC 960. We measured a stock head thickness of 3.68 with our shop caliper. This engine cylinder head was recently serviced. By our local reputable auto parts machine shop. This head was thoroughly degreased, hot-tanked and shot-peened to the bare casting. The head was also magnafuxed for integrity. No cracks were found or any other issues were indicated by our machine shop. The head was finished in cast iron…
Read More
Reconditioned_and_Primed_Wide_Port_Engine_Cylinder_Head_219019_for_Triumph_TR6_01_be

Reconditioned and Primed Wide-Port Engine Cylinder Head 219019 for Triumph TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the wide-port induction head found on the later-model Triumph TR6. This cylinder head can also be retrofitted to a TR250, TR5, and earlier TR6, provided that you also have the proper later wide-port intake manifold for this wider-port induction head configuration. The distance between these intake ports is approximately 0.95. We measured a factory stock head thickness of 3.55 with our shop caliper. The Stanpart casting number is 313247. The part number stamped on this cylinder head is 219019. This engine cylinder head was…
Read More