Port Cylinder Head

ford
Ford_Xflow_1600_OHV_Engine_Chambered_Ported_Cylinder_Head_Escort_Capri_Cortina_01_oyc

Ford Xflow 1600 OHV Engine Chambered Ported Cylinder Head (Escort Capri Cortina)

For sale is a Ford Crossflow 1600 OHV Chambered Cylinder Head. It comes exactly as seen in the photos. It's been stripped, cleaned and painted in gloss black high temp paint, it has also had some porting work done as well as the valves being reseated, along with new valve stem seals. Great upgrade for many xflow engines (Escort, Capri, Cortina, Fiesta). Perfect if you were going down the turbo route and wanted to lower the compression and had a non chambered head.
Read More
Ford_Ka_Endura_1_3_Mk_1_Ported_cylinder_Head_01_suae

Ford Ka Endura 1.3 Mk 1 Ported cylinder Head

Ford Ka Endura 1.3 Mk 1 Ported cylinder Head. 1.3 endura cylinder head from when i brought my new mk 1 ka shell. It has definatley had some flow work done to the ports. As you can see it is need of a clean up. I have had it for years but its always been a spare. Its comes with a new headset as pictured. I can post if required. Any questions please ask i have loads of endura parts. Including a couple of full engines. Any questions please call on 07791612347. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Engines & Engine Parts\Engines". The seller…
Read More
Ford_Ka_Endura_1_3_Mk_1_racing_engine_ported_head_Kent_fast_road_cam_01_ly

Ford Ka Endura 1.3 Mk 1 racing engine ported head. Kent fast road cam

Ford Ka Endura 1.3 Mk 1 race rally engine does not include 1.3 gearbox, 4 branch and 909 ford racing adaptor plate and puma throttle body. I will however include a standard throttle body. 1.3 endura fitted with a gasflowed cylinder head which was fully freshened up with new seal kit after the porting was done. Engine has a fast road cam kit fitted also at same time. I believe the piston rings are worn and could do with replacing as the bottom end wasnt touched apart from the cam kit. Always serviced with 5w30 fully synthetic oil every 3k. Comes with champion ignition leads and new coil pack that…
Read More
Ford_Crossflow_Xflow_Cylinder_head_Porting_CNC_Machining_01_jx

Ford Crossflow Xflow Cylinder head Porting CNC Machining

Ford Crossflow Xflow Cylinder head Machining. Resurface all gasket faces and rocker mount. CNC machined guide bore for bronze guides and correct valve spacing. Offset guide bore machining available at an additional cost. Machine spring platform to provide correct spring installed height. Install and hone guides. Counter bore valve throat to 85-90% valve size depending on application. Cut valves to equal depth. 4 Angle valve seats. Hand port seat throat and bowl. Porting work is an additional cost and dependent on application. Contact number is in the last photo feel free to ask any questions. The item "Ford Crossflow Xflow Cylinder head Porting CNC Machining" is in sale since Monday,…
Read More
Ford_Duratec_HE_2_0_Ported_and_Flow_Tested_Cylinder_Head_1mm_Valves_New_01_ipcv

Ford Duratec HE 2.0 Ported and Flow Tested Cylinder Head +1mm Valves New

The cylinder head is new casting and not a reconditioned one. The valve sizes are +1, 36mm - 31mm. Cylinder head has been flow tested with a Superflow SF450, The inlet airflow is enough for 295 bhp. The item "Ford Duratec HE 2.0 Ported and Flow Tested Cylinder Head +1mm Valves New" is in sale since Monday, October 25, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Engines & Engine Parts\Cylinder Heads". The seller is "valiant868" and is located in Boston. This item can't be shipped, the buyer must pick up the item. Brand: Ford Type: Cylinder Head
Read More