BIG BLOCK CHEVY 300cc OVAL PORT ALUMINUM HEADS BY SPEEDMASTER. These heads are bare, without hardware. This sale is for a set of heads (2 heads). You may have noticed other sellers using a similar name offering similar products. These other sellers have capitalized on our name as we see it, and many customers searching for us will inadvertently find them, thinking we are one in the same company. There is only one Skip White. Our official company name is Skip White Performance. Please see the article in the lower part of this ad for a more detailed explanation. The Speedmaster bbc heads are perfect for 396, 402, 427, 454, 496 and 540 street/strip engines. They will produce up to 725 hp with the proper cam and intake manifold on pump gas. We also offer our new line of rectangular port bbc Bravo heads in our other listings. In the lower section of this ad you will find valuable information on how these heads perform when used with various engine sizes and cam combinations in street rod form. Please read the complete ad before purchasing. These heads are not suitable on 396 or 402 engines that have the less then 4.250 bore size. With the larger 2.250 intake valve on our OVAL heads, it can interfere with the cylinder wall. These heads are well suited on 4.280 and larger bore BBC engines. The recommended compression would be from 9.8:1 to 10.5:1 with pump gas, taking advantage of the aluminum castings. Valve sizes to use is 2.250 and 1.88. These heads have the correct seat diameter to allow use of these valves. These are true multi-purpose heads for street, drag race, and power boat applications. This set is an excellent upgrade over OEM cast iron heads on your big block engine. We honestly feel there is not a better set of heads for the price. These heads are tried and proven. The intake runner volume is 300cc, and the combustion chambers are 119cc. You can reduce your engine weight by around 100 lbs. With the use of aluminum heads. You can also increase your power up to 250hp over an OEM 454 engine, depending on choice of cam and intake manifold. Compression ratio must be approx. 10.5:1 or higher on 427 and 454 engines. 496 or larger engines can get by with less compression but no lower than 10:1. The horsepower gain from the weight reduction of aluminum heads alone is noticeable, not to mention the fact that aluminum heads will allow you to run a bit more compression without the risk of detonation. The benefits are many to running aluminum heads. The most expensive cars in the world all run them. There are no drawbacks! Tech support is available. We are confident that we offer the best advice in the business. We also offer these heads in built form. We hope you will check out our other listings for the many other items we have available. SPEC INFO AND RECOMMENDED ACCESSORIES FOR FOR THESE HEADS. Intake Gasket: Felpro 1212 For oval port heads. Depends on what type exhaust you’re using. Best to try and match up the gasket to your header or exhaust manifold. Felpro 1017-1 for Mark V & VI blocks, or our PC-5211 MLS head gaskets for Mark V and earlier blocks. BBC-50 Head bolts, or. Most any oval port style intake will work. Our oval port aluminum intakes fit very well. See info in this listing for details on this. Most stock or aftermarket pistons. Our Wiseco pistons combine perfectly with these heads. Push Rod length: You must use a push rod measuring device to determine what length is needed. Push rod Guide Plate. We strongly recommend Dart adjustable guide plates. See our other listings. Comp brand machined locks are used on all of our heads. 750reach, gasket, Autolite 3923 or NGK 4544 for one step lower heat range. See our other listings for these. 1.46 outer diameter. Dual spring for hyd. Single for those running a hyd. 250 over intake valves, std length exhaust valves. BBC 7/16 stud mount. Head Bolts = 65-70 ft/lb. Rocker Studs = 50 ft/lb. Manifold = 35 ft/lb. BC, GM OR DART. Weight: 69-72 lbs fully assembled pair. I’m sure many of you have noticed there are 2 high performance engine builders in Kingsport, TN with similar names, leading to a great amount of confusion. We are Skip White Performance, NOT White Performance and Machine. Due to the name similarity, many customers looking for us online inadvertently find them, thinking we are the same company. There is no connection between the two companies. We don’t have a problem with free enterprise (competition). However, when the competition builds their foundation on such things as a name similarity and their supposedly long history of being in business, then we think it’s about time we set the record straight. We have owned White Performance since 2003, with the exception of the machine shop, which was owned by Fred White at the time. Due to their limited production capability and many disagreements about the engine and head building process as well as workmanship, we opted to open a full scale machine shop of our own a few years later. Fred White began competing against us even though our contract had a non-compete clause in it. As our business grew, we opened a second, much larger warehouse and machine shop around 2011, located on Brookside Ln. By putting heart and soul in this company, we have become the number one street rod engine builder in the nation. This investor lacked any knowledge of this industry. They continue to use the White Performance & Machine name. Contrary to what is posted on their website, Fred White is no longer associated with the company in any way. All in all, we have been in this business going on 17+ years. Skip White’s passion has been owning and building street rods for 47 years on a personal level. The knowledge he has gained over time has allowed him to venture into this business and succeed to a very high level. The great pretenders continue capitalizing on our success due to the name similarity, but have been degrading our reputation. We have been getting calls nearly on a daily basis from people that now realize there are two shops in this town with very similar names. Customers complain of serious problems in getting their orders in a timely manner from them. FAST FORWARD TO PRESENT DAY… We have become the largest street rod engine builder in the nation. 2-5 weeks, perhaps sooner, depending on the season. We are not responsible for collateral damage caused by the use of this product. The RGA number must be included on the return label. Even though you may have explained the problem to us, and been granted permission to return the product, we must have a written explanation and a contact number included with the product. It is also recommended that you include the name of the person from our company that you have been in contact with. Following these guidelines will make the return process work as it should. Additional charges may apply. If you are in a 3 day zone, and your package leaves on a Thursday, you should receive it on the following Tuesday. The item “BIG BLOCK BBC CHEVY 454 496 300cc OVAL PORT ALUMINUM HEADS BARE SET” is in sale since Tuesday, March 9, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Cylinder Heads”. The seller is “skipwhite” and is located in Kingsport, Tennessee. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Finish: ALUMINUM
  • Manufacturer Part Number: BBC OVAL PORT HEADS.
  • Non-Domestic Product: No
  • Manufacturer Warranty: 1 Year


Incoming search terms:

  • oval port aluminum bbc heads