Pair_of_Complete_317_LS_Cylinder_Heads_4_8_5_3_5_7_6_0_Cathedral_Port_LQ9_LQ4_01_hjc

Pair of Complete 317 LS Cylinder Heads 4.8 5.3 5.7 6.0 Cathedral Port LQ9 LQ4

This is a set of 317 heads that were pulled from a running 2004 6.0L LQ9 Cadillac Escalade with 98,000 miles. These have been checked with a machinist straight edge and are straight. But you may still want a shop to take a look at them. They of course will need cleaned up and may benefit from a valve job. But they could probably be bolted on as is and run just fine. These have no broken bolts or any any other issue. These heads have never been decked or milled in any way. These are great for lowering compression for turbo motors. If you have any questions please feel…
Read More
Lt1_Direct_Injected_Gm_Cylinder_Heads_pair_Cnc_Ported_For_Lt1_6_2_Blocks_01_oss

Lt1 Direct Injected Gm Cylinder Heads (pair) Cnc Ported For Lt1 6.2 Blocks

LT1 DIRECT INJECTED FACTORY CYLINDER HEADS. CNC PORTED FOR GM LT1 6.2 BLOCKS. GM factory cast re-manufactured cylinder heads for the GM LT1 6.2L series. Engine block, these heads come assembled with a choice of three different valve configurations. Exhaust Valves, Manley Extreme Duty. Intake Valves, Manley Severe Duty/Pro Flo. New Manley Severe Duty/Pro Flo intake valves. New Manley Extreme Duty exhaust valves. New Manley Nextek Valve Springs. We are CBM Motorsports based out of Colton, CA, USA.. We specialize in racing and high performance LS engines and parts for off road vehicles, hot rods, muscle cars, drag cars, rock crawlers and watercraft. We manufacture and stock hundreds of specialty…
Read More
Original_GM_Pair_of_346236_BBC_Oval_Port_396_402_454_Cylinder_Heads_01_bab

Original GM Pair of 346236 BBC Oval Port 396 402 454 Cylinder Heads

Original GM Pair of 346236 BBC Oval Port 396 402 454 Cylinder Heads. HARD TO FIND ORIGINAL CLASSIC CAR & TRUCK PARTS. Original pair of GM heads dated M 19 3, (I don't believe that's the correct date code but it's all I can find), and K 5 77, please verify all the castings for yourself as they can be difficult to read. &#######xA0; By the very old dried out Mud Dobber dirt pictured on one of the heads I think it's safe to say these heads have been sitting for a very long time and will need to be gone through! &#######xA0; The vast majority are big block Chevrolet…
Read More
Pair_of_Complete_243_LS_Cylinder_Heads_5_3_5_7_6_0_Cathedral_Port_799_LS6_LS4_SS_01_ywbs

Pair of Complete 243 LS Cylinder Heads 5.3 5.7 6.0 Cathedral Port 799 LS6 LS4 SS

This is a set of infamous 243 heads that were pulled from a running 5.3L LS4 Impala SS with 98,000 miles. These have been checked with a machinist straight edge and are straight. But you may still want a shop to take a look at them. They of course will need cleaned up and may benefit from a valve job. But they could probably be bolted on as is and run just fine. These have no broken bolts or any any other issue. This will also give you a boost in compression if you are swapping from 317's on a 6.0l. If you have any questions please feel free to…
Read More
Edelbrock_Pontiac_12_6_Degree_PORTED_Victor_Bare_Pro_Port_Cylinder_Heads_Pair_01_bgm

Edelbrock Pontiac 12.6 Degree PORTED Victor Bare Pro Port Cylinder Heads Pair

Professionally ported by Goodwin Performance specifically for Butler Performance. We have one of two sets where valve guides have already been installed. All heads are brand new in the box, ready to be built. We can even do that too!! CNC Ported and setup for YellaTerra. 240 offset intake rockers (Part # YT6370). Victor Pro-Port Raw: These new heads are the ultimate choice for extreme Pontiac race applications. They feature raised intake port openings and extended intake flanges for improved flow, while retaining the stock location, making them compatible with Victor series manifolds and Ram Air IV style headers. The intake valves have also been moved away from the cylinder…
Read More
This_is_a_Pair_of_Cylinder_Heads_67_73_VW_Type_1_2_3_Dual_Port_16_85_5_Bore_01_rhip

This is a Pair of Cylinder Heads 67-73 VW Type 1,2, 3 Dual Port 16 85.5 Bore

Pair of Cylinder Heads for a 67-73 VW Type 1,2 or 3 Dual Port 1600cc. Heads come with New 35.5mm Intake and a 32mm Exhaust Valves, with springs keepers and retainers installed. Its ready to install on engine's that have a 85.5mm Bore. Engine: VW Type 1, 2 and 3 1600cc Dual Port. CYL Bore: 85.5mm. Rebuilt and ready to install and GO. SBI SBI500-50 Seat Rings. Cylinder head is the only part that is warrantied with the valves, guides, springs and workmanship of the cylinder head. The item "This is a Pair of Cylinder Heads 67-73 VW Type 1,2, 3 Dual Port 16 85.5 Bore" is in sale since…
Read More
World_Products_Ford_Mustang_Windsor_302_351W_Ported_Cast_Iron_Cylinder_Head_Pair_01_qflb

World Products Ford Mustang Windsor 302 351W Ported Cast Iron Cylinder Head Pair

Matched pair of cast iron cylinder heads cast I-051 / 1-051 World Products Ford Windsor cylinder heads 200cc runners 64cc combustion chambers fits 302 / 351W removed from a former crate engine in a Mustang heads were disassembled and ultrasonic cleaned at a professional machine shop magnafluxed with no cracks bare heads that seats measure about 2.05/1.6 no blow-ups no cracks or weld repairs as shown professionally ported runners at one time as shown ports measure about 1.24x1.30. The item "World Products Ford Mustang Windsor 302 351W Ported Cast Iron Cylinder Head Pair" is in sale since Monday, September 7, 2020. This item is in the category "eBay Motors\Parts &…
Read More
A_Pair_of_Cylinder_heads_VW_1600cc_air_cooled_Twin_port_up_to_1979_complete_01_ei

A Pair of Cylinder heads VW 1600cc air cooled Twin port up to 1979 complete

This is a pair of great Quality Cylinder heads. They are complete with stainless steel valves. They fit VW Beetle and Type 2's fitted with 1600cc twin port engines all years up to 1979 & Mexican beetles. The item "A Pair of Cylinder heads VW 1600cc air cooled Twin port up to 1979 complete" is in sale since Wednesday, September 2, 2015. This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Cylinder Heads & Head Covers". The seller is "megabugvw" and is located in Harrietsham. This item can be shipped to United Kingdom. Brand: MB Manufacturer Part Number: 043101355 Classic Car Part: Yes Manufacturer: Volkswagen
Read More
GM_6_0L_6_2L_L92_LS3_Rebuilt_Cylinder_Heads_823_with_rocker_arms_square_port_PAIR_01_pnr

GM 6.0L 6.2L L92 LS3 Rebuilt Cylinder Heads 823 with rocker arms square port PAIR

GM LS3 L92 Rebuilt Cylinder Heads w/ rocker arms PAIR OEM. Stock LS Series 6.0L / 6.2L. Part # 823 (821 and 5364 also interchangeable). The head has been rebuilt by our engine specialists and is ready to be installed. The head is disassembled, washed, and pressure tested. We replace all valve stems (replace valve guides as necessary), performed a valve job and milled the head. This pair of cylinder heads is compatible with the following vehicles with L92 engines. Yukon Denali, Yukon XL 1500 Denali. Escalade, Escalade ESV, Escalade EXT. This pair of cylinder heads is compatible with the following vehicles with LS3 engines. Corvette (Base and Z51). The…
Read More
NEW_PAIR_VW_1600_DUAL_PORT_CYLINDER_HEADS_withDUAL_SPRINGS_94mm_BORE_01_up

NEW PAIR VW 1600 DUAL PORT CYLINDER HEADS withDUAL SPRINGS 94mm BORE

This is a brand new Pair Cylinder Heads for a VW Type 1, 2 or 3 Dual Port. Heads come with 40mm Intake and a 35.5mm Exhaust Valves, with Dual springs, keepers and Chromoly retainers installed. Its ready to install on engine's that have a 94mm Bore ID. Engine: VW Type 1, 2 and 3 Dual Port. CYL Bore: 94mm ID. Valves: 40 by 35.5. Please see my other adds for 85.5 and 90/92mm Bore. For more Stock & High performance parts &. For VWs, Porsches & Subarus. We cannot guarantee product compatibility. If unsure that this product is correct for your application please ask before and we will do…
Read More