Reconditioned_Ported_Engine_Cylinder_Head_12H1326_1963_1970_MGB_race_01_ha

Reconditioned Ported Engine Cylinder Head 12H1326 1963 1970 MGB race

This head was built for a personal project and never used. I started with the 12H1326 which is the best of the MGB heads. All new valves and unrated dual springs. The intake valve seats were enlarged to allow for the use of a factory 1973 MGB big valve 1.625 VS the original 1.562. The head has a 5 angle valve job to accommodate better flow. 2 angles are cut on the valve and 3 on the seats. The exhaust seats are hardened so you can run unleaded. The head was professionally ported and polished to increase flow. This head with work on any pre 18v car. Since these head…
Read More
Canam_Can_Am_Brp_Ds450_Ds_450_XMX_XXC_X_Mph_Ported_Engine_Cylinder_Head_Valves_B_01_zi

Canam Can Am Brp Ds450 Ds 450 XMX XXC X Mph Ported Engine Cylinder Head Valves B

THIS ITEM FITS ALL YEARS. HEAD DOES NOT HAVE ANY CAMS IN IT. THE VALVE LASH WILL NEED TO BE CHECKED AND PROPERLY SET BEFORE ASSEMBLING AND INSTALLING. IT IS RECOMMENDED TO HAVE A PROFESSIONAL MECHANIC CHECK AND PROPERLY SET VALVE LASH. PART DOES NEED SOME WORK BEFORE INSTALLING, AS OUTLINED BELOW. ITEM WILL COME EXACTLY AS PICTURED. Additional parts for assembly. ITEM IS A RACE MODIFIED HEAD. MPH (MOLASKA PERFORMANCE HEAD) PORT WORK. PORTED AND EPOXY ON INTAKE. XCELDYNE TITANIUM VALVE KIT WITH SPINGS. AFTERMARKET COPPER SEATS & VALVE GUIDES. AREA THAT NEEDS ATTENTION. MISSING BOTTOM SPRING RETAINERS. Does not include electrical or engine parts. The item "CANAM CAN…
Read More
Reconditioned_and_Primed_Wide_Port_Engine_Cylinder_Head_218227_for_Triumph_TR6_01_ds

Reconditioned and Primed Wide-Port Engine Cylinder Head 218227 for Triumph TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the wide-port induction head found on the later-model Triumph TR6. This cylinder head can also be retrofitted to a TR250, TR5, and earlier TR6, provided that you also have the proper later wide-port intake manifold for this wider-port induction head configuration. The distance between these intake ports is approximately 0.95. We measured a factory stock head thickness of 3.55 with our shop caliper. The Stanpart casting number is 312388. The part number stamped on this cylinder head is 218227. This engine cylinder head was…
Read More
Chevy_12562934_Big_Block_Chevy_Rectangle_Port_Marine_Cylinder_Head_502_Engine_01_snyy

Chevy 12562934 Big Block Chevy Rectangle Port Marine Cylinder Head 502 Engine

COMES AS SEEN IN THE PICS CAME OFF A RUNNING MOTOR IN GREAT SHAPE. The item "Chevy 12562934 Big Block Chevy Rectangle Port Marine Cylinder Head 502 Engine" is in sale since Wednesday, May 29, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Cylinder Heads & Parts". The seller is "partsbandit" and is located in Whittier, California. This item can be shipped worldwide. Modified Item: No Country/Region of Manufacture: United States Custom Bundle: No Placement on Vehicle: Left Country of Manufacture: United States Surface Finish: Steel Manufacturer Part Number: 12562934 Brand: General Motors Non-Domestic Product: No Warranty: Yes
Read More
Reconditioned_Narrow_Port_Engine_Cylinder_Head_516323_for_Triumph_TR250_and_TR6_01_qzvw

Reconditioned Narrow-Port Engine Cylinder Head 516323 for Triumph TR250 and TR6

Ann Arbor Sportscar is pleased to offer. A reconditioned used OEM bare builder engine cylinder head assembly for the stock Triumph 6-cyl. In-line 2498cc engine with the narrow-port induction head found on the Triumph TR250 and early TR6. This cylinder head can also be retrofitted to a later TR6 provided that you also have the proper earlier narrow-port intake manifold for this narrow-port induction head configuration. The distance between these intake ports is approximately 0.65. The Stanpart casting number is 307837. The part number stamped on this cylinder head is 516323. We measured a head thickness of 3.45 with our shop caliper. This OEM cylinder head was recently serviced. By…
Read More
CNC_Ported_Cylinder_Head_for_Mini_JCW_Cooper_S_2nd_Gen_N14_Engine_01_fh

CNC Ported Cylinder Head for Mini / JCW Cooper S (2nd Gen) N14 Engine

CPL Racing CNC ported cylinder head service for BMW Mini / JCW Cooper S (2nd gen) N14 engine (donor cylinder head not included). At CPL Racing we have been porting cylinder heads for 20 years. Our recent acquisition of a new 5 axis CNC machining centre however, has allowed us to expand our services further into CNC ported cylinder heads. Unlike any other company, we do not digitise hand ported heads and reproduce them by CNC machining. Our process is a completely new approach which begins by digitising the stock head. Various ports are then designed using computer aided design (CAD), using formulas we have developed over many years complemented…
Read More