LS_Rectangle_Port_Cylinder_Head_to_Cathedral_Intake_Adapters_01_vha

LS Rectangle Port Cylinder Head to Cathedral Intake Adapters

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. Rectangle Port Cylinder Head. Some intake manifolds will require modification of alignment pin to sit flush on adapters. Fit raised port LS7 cylinder heads. Rectangle port head and bolts to. Cathedral port intake manifold, supercharger or blower. Package Includes: 2 adapter plates (1/2 thick) with 8 O-ring seals. Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. Intake manifold bolt lengths. Factory GM LSA supercharger (M6 x 70mm) use ICT part #. Car intake manifold (M6 x 130mm) use ICT part #.…
Read More
Pair_of_Complete_317_LS_Cylinder_Heads_4_8_5_3_5_7_6_0_Cathedral_Port_LQ9_LQ4_01_hjc

Pair of Complete 317 LS Cylinder Heads 4.8 5.3 5.7 6.0 Cathedral Port LQ9 LQ4

This is a set of 317 heads that were pulled from a running 2004 6.0L LQ9 Cadillac Escalade with 98,000 miles. These have been checked with a machinist straight edge and are straight. But you may still want a shop to take a look at them. They of course will need cleaned up and may benefit from a valve job. But they could probably be bolted on as is and run just fine. These have no broken bolts or any any other issue. These heads have never been decked or milled in any way. These are great for lowering compression for turbo motors. If you have any questions please feel…
Read More
LS_Cathedral_Port_Cylinder_Head_to_Rectangle_Port_Intake_Manifold_Adapters_01_xy

LS Cathedral Port Cylinder Head to Rectangle Port Intake Manifold Adapters

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. Cathedral Port Cylinder Head. Rectangle Port Intake Adapter. Some intake manifolds will require modification of alignment pin to sit flush on adapters. Cathedral Port Heads and will adapt to. Rectangle port intakes, supercharger or blower. Fit raised port LS7 intakes. Package Includes: 2 adapter plates (1/2 thick), orings, 70mm bolts with sealing washers for use with an LSA supercharger (please call for other lengths of intake bolts). Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. Intake manifold bolt lengths required when…
Read More
FAST_146302B_LSXR_Intake_Manifold_LS1_LS2_LS6_Cathedral_Port_Cylinder_Heads_01_gstp

FAST 146302B LSXR Intake Manifold LS1, LS2 & LS6 Cathedral Port Cylinder Heads

FAST 146302B LSXR Intake Manifold LS1, LS2 & LS6 Cathedral Port Cylinder Heads. LSXR 102mm Intake Manifold. 50-State Legal Under C. Around here, we don't just sell parts - we rely on them when driving our own cars around racetracks, dirt trails, and interstates across the country. Parts may be our business - but grease, fuel, exhaust, power, and speed are what we live for. Today, more than 350 people are employed by JEGS and the business draws in hundreds of thousands of customers each year. Yet, we maintain the culture stared by Jeg Coughlin from the very beginning: a family-run performance shop that preserves a trusted relationship with each…
Read More
Pair_of_Complete_243_LS_Cylinder_Heads_5_3_5_7_6_0_Cathedral_Port_799_LS6_LS4_SS_01_ywbs

Pair of Complete 243 LS Cylinder Heads 5.3 5.7 6.0 Cathedral Port 799 LS6 LS4 SS

This is a set of infamous 243 heads that were pulled from a running 5.3L LS4 Impala SS with 98,000 miles. These have been checked with a machinist straight edge and are straight. But you may still want a shop to take a look at them. They of course will need cleaned up and may benefit from a valve job. But they could probably be bolted on as is and run just fine. These have no broken bolts or any any other issue. This will also give you a boost in compression if you are swapping from 317's on a 6.0l. If you have any questions please feel free to…
Read More
Gm_799_Lsx_Ls6_Ls1_Ls2_5_3_4_8_6_0_Cathedral_Port_Cylinder_Heads_Rocker_Set_01_gjr

Gm 799 Lsx Ls6 Ls1 Ls2 5.3 4.8 6.0 Cathedral Port Cylinder Heads & Rocker Set

GM 799 LSX LS6 LS1 LS2 5.3 4.8 6.0 CATHEDRAL PORT CYLINDER HEADS & ROCKER SET. 0 (0 = not available or unknown). Notes:5.3L, 799 CAST, PAIR GM 799 LSX LS6 LS1 LS2 5.3 4.8 6.0 CATHEDRAL PORT CYLINDER HEADS & ROCKER SET082519. This part will fit these makes and models with these options. The 30 day period starts when you take possession of the part. All of the parts we sell are guaranteed to be in good working condition unless otherwise noted. We ONLY guarantee the part(s) will fit the vehicle(s) listed in the description. If your vehicle was not originally equipped with the EXACT part(s) listed, it is…
Read More
LS_Rectangle_Port_Cylinder_Head_to_Cathedral_Intake_Adapters_01_bm

LS Rectangle Port Cylinder Head to Cathedral Intake Adapters

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. Rectangle Port Cylinder Head. Fit raised port LS7 cylinder heads. Rectangle port head and bolts to. Cathedral port intake manifold, supercharger or blower. Package Includes: 2 adapter plates (1/2 thick) with 8 O-ring seals. Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. Intake manifold bolt lengths. Factory GM LSA supercharger (M6 x 70mm) use ICT part #. Car intake manifold (M6 x 130mm) use ICT part #. Truck intake manifold (M6 x 90mm) use ICT part #. See our other listing…
Read More
LS_Intake_Manifold_Spacer_for_Cathedral_Port_Cylinder_Head_LS1_LS2_LQ9_L33_LQ4_01_uxl

LS Intake Manifold Spacer for Cathedral Port Cylinder Head LS1 LS2 LQ9 L33 LQ4

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. LS Cathedral Port Intake Manifold Spacer. Compatible with RPO code engines: LS1, LS2, LS6, LR4, LM7, L59, LM4, L33, LQ4, LQ9, LY2, L20, LH6, LY5, LMG, LC9, LS4, LH8. Raises the intake manifold approximately 1/2. Includes: 2 riser plates, 8 oring seals, and flange bolts (bolts for car intakes included). Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. If you are running a truck intake you will need M6-90mm bolts, and M6 washers. ICT Billet LLC is not responsible for missing…
Read More
LS3_Rectangle_Port_Cylinder_Head_to_LS1_Cathedral_Intake_Adapters_LS_LSX_LS2_551_01_mdxz

LS3 Rectangle Port Cylinder Head to LS1 Cathedral Intake Adapters LS LSX LS2 551

LS3 Rectangle Port Cylinder Head to LS1 Cathedral Intake Adapters LS LSX LS2 551. LS3 Rectangle Port Cylinder Head to LS1 Cathedral Intake Adapters LS LSX LS2. Rectangle Port Cylinder Head to Cathedral Port Intake Can ONLY be used with LS rectangle port cylinder heads Will not fit raised port LS7 cylinder heads. Fits ANY rectangle port head and bolts to ANY cathedral port intake manifold, supercharger or blower. Package Includes: 2 adapter plates (1/2 thick) with 8 O-ring seals. Made in Wichita, KS from 6061-T6, USA billet aluminum. Intake manifold bolt lengths required when used with. Factory GM supercharger (M6 x 70mm) use ICT part # 551400. Car intake…
Read More